| |
 |
RH1(economical) |
|
| |
12 DI/12 DO, AC220 power supply, without expansion module,
can not extend with BD board, without clock, support power-off retentive, Support basic logic control and data operation.
|
| |
 |
|
|
General Specification
Item |
Specification |
|
Insulation Voltage |
Above DC 500V 2MΩ |
|
Noise Resistance |
1000V 1uS pulse for 1 minute |
|
Environment Temperature |
0℃~60℃ |
|
Ambient Humidity |
5%~95% |
|
COM 1 |
RS-232, be connected to host machine or HMI for programming or debugging |
|
COM 2 |
RS-232 or RS-485，network or connect to intelligent instrument, inverter, etc. |
|
Installation |
M3 screw fixed or DIN46277 (35mm width) guide rail installation |
|
Grounding |
The third type grounding (Never perform common grounding with strong power system) |
Functional Specification
Item |
Specification |
|
Program operation Mode |
Circulation scanning mode, timing scanning mode |
|
Program Mode |
Instructions and ladder chart |
|
Dispose Speed |
0.5us |
|
Power Failure Holding |
FlashROM |
|
User Program’s Capacity |
32K |
|
I/O Points |
12 input points，12 output points |
|
Output Format |
Relay |
|
Power Supply |
AC220V |
|
Interior Coil’s Points (M) |
448 points |
|
Timer（T） |
Points |
80 points |
|
Specification |
100mS timer：set time 0.1~3276.7 seconds
10mS timer：set time 0.01~327.67 seconds
1mS timer：set time 0.001~32.767 seconds |
|
Counter（C） |
Points |
48 Points |
|
Specification |
16 bits counter:：Set value K0~32767
32 bits counter：Set value K0~2147483647 |
|
Data Register（D） |
288 characters |
|
FlashROM Register（FD） |
510 characters |
|
High-speed Count Format |
- |
|
Timing Scanning Interval Setting |
1~99mS |
|
Password Protection |
6 characters ASCII |
|
Self-diagnose Function |
Power on self-diagnose, monitor timer, grammar check |
| |
