| |
 |
RH3(standard) |
|
| |
14 DI/10 DO, AC220 power supply;
can be expanded with expansion module, BD board.
Support RTC, power-off retentive;
Support basic logic control and data operation;
Support high speed count, pulse output, exterior interruption, C language function block, free switch for I/O points, free protocol communication and MODBUS communication. |
| |
 |
|
|
General Specifications
|
Item |
Specification |
|
Insulation Voltage |
Above DC 500V 2MΩ |
|
Noise Resistance |
1000V 1uS pulse for 1 minute |
|
Environment Temperature |
0℃~60℃ |
|
Ambient Humidity |
5%~95% |
|
COM 1 |
RS-232, be connected to host machine or HMI for programming or debugging |
|
COM 2 |
RS-485/RS-232，network or connect to intelligent instrument, inverter, etc. |
|
COM 3 |
BD extensional communication port RS-232/RS-485 |
|
Installation |
M3 screw fixed or DIN46277 (35mm width) guide rail installation |
|
Grounding |
The third type grounding (Never perform common grounding with strong power system) |
Functional Specifications
|
Item |
Specification |
|
Program operation Mode |
Circulation scanning mode, timing scanning mode |
|
Program Mode |
Instructions and ladder chart |
|
Dispose Speed |
0.5us |
|
Power Failure Holding |
FlashROM |
|
User Program’s Capacity |
8000 steps |
|
I/O Points |
14 input points，10 output points |
|
Output Format |
Relay |
|
Power Supply |
AC220V |
|
Interior Coil’s Points (M) |
8512 points |
|
Timer（T） |
Points |
620 points |
|
Specification |
100mS timer：set time 0.1~3276.7 seconds
10mS timer：set time 0.01~327.67 seconds
1mS timer：set time 0.001~32.767 seconds |
|
Counter（C） |
Points |
635 Points |
|
Specification |
16 bits counter:：Set value K0~32767
32 bits counter：Set value K0~2147483647 |
|
Data Register（D） |
8512 characters |
|
FlashROM Register（FD） |
2048 characters |
|
High-speed Count Format |
High speed counter, pulse output, exterior interruption |
|
Timing Scanning Interval Setting |
1~99mS |
|
Password Protection |
6 characters ASCII |
|
Self-diagnose Function |
Power on self-diagnose, monitor timer, grammar check |
Note: “-s” added behind the model name means it with internal clock and RS-485 communication port.
Dimensions:
| |
